F Series Parallel Shaft Helical Geared Motor

Product Feature

1. Highly modular design: Can Easily with various types of motor or adopt other power input. The same type of power can be used for the motor. Easy to realize the combination of connection between model.

2. The transmission ratio: divided fine, scope. Combination model can greatly transmission ratio, namely the output very low speed.
3. Installation forms: installation position is not restricted.
4. High strength, small volume: the high strength cast iron. Gear, gear shaft with gas carburizing quenching fine grinding process, thus unit volume high bearing capacity.
5. Long service life: in the correct selection (including the selection of proper use coefficient) and maintain normal use, under the condition of speed reducer (except the vulnerable parts) of main components of generally not be less than 20000 hours of service life. Wearing parts including lubricating oil, oil seal and bearing.
6. Low noise: reducer main components are machined, and through the assembly and test, and deceleration machine noise is low.
7. High efficiency: single type of no less than 95% efficiency.
8. May withstand the big radial direction load.
9. Can inherit not greater than 15% radial force of the axial load.
Special tiny F series of inclined gear motor shaft installed with parallel axis, very suitable for will matter restricted conditions of use. With the installation, flange installation and feet with shaft type.
Technical Parameter
Main Technical Features:
Output Speed (r/min) 0.1-752
Output Torque (N. m) 18000 highest
Motor Power (K w) 0.12-200